135A MIG Welder, 110V Flux Core MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Portable Welder Equipment with Welding Helmet, Welding Gloves & 2lb Welding Wire, WLD-1601

Price: $149.99
(as of Sep 30, 2024 17:20:11 UTC – Details)

Product Description

Solar Powered Auto Darkening Welding Helmet

Adopted the TRUE COLOR design, this solar powered auto darkening welding helmet (VIEWING SIZE: 3.66″x1.69″) can reduce the lime green tint and protect your eyes from injury while welding, and you can freely adjust the SHADE, SENSITIVITY and DELAY CONTROL according to different kinds of welding modes. In addition, a replaceable lithium BATTERY is included, and equipped with solar panel technology to allow for charging while welding.

Helmet Installation Guide

The installation of this adjustable headband requires for only several minutes, please install based on the following steps (and you can also learn from the video):

1. Insert the PLASTIC SCREW (Part 17) through the hole of HEADBAND (Part 9) and put the ANGLE SET NUT (Part 16) on it (Note: the raised edge should be backward);

2. Put the ANGLE SET PLATE 2 (Part 15) on the ANGLE SET NUT (Note: the raised part should be upward);

3. Put the ANGLE SET PLATE 1 (Part 14) on the ANGLE SET PLATE 2 (Note: the plate 1 can be adjusted);

4. Attach the HEADBAND (Part 9) to the HELMET SHELL (Part 8) and notice the square part should be stuck in the slot;

5. Put the CHECK NUT (Part 13) on and tighten the PLASTIC NUT (Part 12) (Notice not to tighten too tightly)

MIG

Install the MIG control switch into sockets.Connect MIG gun cable to (-) terminal of welder and work clamp to (+) terminal. Do not over-tighten.Set the work indicator to MIG mode and select the corresponding wire size.

TIG

TIG torch is connected to the negative (-) terminal of the welding machine. (TIG Torch and TIG Torch Adapter are not included in package.)The work clamp is connected to the positive terminal (+).Finally, the gas hose is connected to the gas regulator on the gas cylinder to be used.This is usually used for welding materials such as steel and stainless steel.Set the work indicator to TIG mode.

MMA

DC (+) Welding connection:

Connect the electrode cable to the (+) terminal.Do not overtighten the keyway by turning it clockwise.Connect work clamp to the (-) terminal.Plug in connector with key cable.Set the work indicator to MMA mode.

For DC (-) welding, switch the connections above so that the electrode cable is connected to (-) and the work clamp is connected to (+).

Note: Both wiring methods can be used.

【Powerful 3-In-1 Welder】Composed with Flux MIG (FCAW), Lift TIG (GTAW) and Stick/MMA (SMAW), our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
【Synergic Control】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, current and wire feeding speed based on your sheet thickness, which is quite friendly for both professional welding worker and beginner.
【Safe & Intelligent】Features overheat and overload protection, our MIG welder will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
【Set Includes】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66″x1.69″), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030″ flux core welding wire with 2-pound spool.